Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home Products100W CO2 Laser Tube

100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

    • 100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine
    • 100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine
    • 100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine
  • 100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

    Product Details:

    Place of Origin: China
    Brand Name: Davi
    Certification: CE,ISO9001
    Model Number: T100

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Price: Negotiation
    Packaging Details: 90cm*35cm*31cm
    Payment Terms: T/T, D/P, , L/C, Western Union, MoneyGram
    Supply Ability: 50 units per month
    Contact Now
    Detailed Product Description
    Output Power: 100w Model: T100
    Wavelength: 10.6um Power Stability Rate: ±5%
    Beam Divergence Angle: <5.2 Input Voltage/current: 48V/28A

     T100 : 100W RF CO2 Laser Ceramic Laser Tube , Laser Source in Laser Marking Machine , Engraving Machine , Cutting Machine

     

     

    General knowledge about laser technology

    The concept of a laser was first invented by Charles Townes and Arthur Schawlow in 1958 while working at Bell Labs, but first laser was not built until 1960 by Theodore Maiman. Since that time many improvements and innovations have occurred, and today there are thousands of lasers being used in medical, industrial, telecommunication and defense applications. A laser differs from other light sources (flame, flashlight, lightbulb or LED) in that the light it produces is very directional or coherent. This allows the light to project in a beam or narrow cylinder instead of randomly illuminating in all directions simultaneously. Lasers also emit light over small ranges or at single wavelengths. The wavelengths can be attributed to colors of the light and are usually based on the laser type.

    CO2 lasers can emit at 10.55um- 10.63um and 9.3um which is very deep in the infrared.

     

     

    Leading supplier of Metal RF co2 laser tubes in China

    DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.

     

     

    For effortless lasering of wood, acrylics, steel and paper!

    Model T100: 100W CO2 laser are suitable for the engraving and cutting of many types of materials, ranging from metal to plastics, and from leather to glass.

     

    100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

    100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

     

    Model T100 product picture :

    100 Watt Co2 Laser Source Beam Divergence Angle Below 5.2 For Engraving Machine

     

          Model T100 specification and working condition

     

    Model No. T100

     

    Wavelength

    10.6μm
    Continuous rated output Power 100W
    Power stability rate ±5%
    Mode of quality M2﹤1.2

     

    Beam diameter(mm)

    2.5

     

    Beam divergence angle(mR,full angle)

    <5.2

     

    duty cycle

    0 - 100%DC

     

    working frequency(KHz)

    0-100

     

    Input voltage/current

    48V/28A

     

    Cooling way

    Air cooling/ water cooling optional

     

    Max heat load

    1400W

     

    Weight

    15kg

    1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.

    2. Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)

    3. Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     

     

     

         T100 Signal Interface Description and Connector Pinout

     

    RJ45 connector Connect instruction Signal instruction

     

    8

    connect with the pwm positive signal of the corresponding marking card or cutting card

     

     

    RF Enable

     

     

    6

     

     

     

     

    2 and 6

    short circuit

    Laser status output

    Logic output,1=LASER OK,0=LASER Fault;

     

     

    2

    Control enable

    Logical input;1= Laser control enable,0=Laser controlled shutdown

     

     

    1,3,4

    Connect with signal of corresponding marking card or cutting card

     

     

     

    GND

    Attention:

    1. 48V 30A power supply must ground connected.

    2. Pay attention to the dust proof of the laser output window,prevent the lens burn caused by dust pollution, especially when the output window is upward.

    3. Prevent the back reflection of laser,any back reflection will cause the damage of laser.

    4. We suggest to fix either front end or back end of the laser tube, but don’t fix them both when you assemble, the purpose is to prevent the laser cavity shape distortion being caused by heat-expansion and cold-contraction during use.

    5. The fans are suction type, please make sure the heat sink has sufficient space(more than 3CM) for ventilation and cooling purpose . The fans have to be cleaned up regularly in order to keep good ventilation .

    When you have other questions in the using process, please contact with us for solution on time .

     

     

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: tracy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.