Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home Products20W CO2 Laser Tube

10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode

10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode

    • 10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode
    • 10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode
  • 10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode

    Product Details:

    Place of Origin: Beijing,China
    Brand Name: DAVI
    Certification: CE
    Model Number: D20

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 unit
    Price: Negotiation
    Packaging Details: 60cm*28cm*23cm
    Delivery Time: within 5 working days
    Payment Terms: T/T, L/C, D/P, Western Union, MoneyGram
    Supply Ability: 200 units per months
    Contact Now
    Detailed Product Description
    Rated Output Power: 20w Wavelength: 10.6um
    Mareial: Aluminum Color: Grey
    Beam Diameter: 1.8±0.2mm M2: <1.2

    20W CO2 Laser Tube 10.6um wavelength longer lifespan high duriability TEM00 mode

     

    Largest supplier of Metal RF co2 laser tubes in China:

     

    DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.

     

    Application:

    DAVI CO2 Laser Tube can be successfully applied in medical,cosmetic,electronic components,machinery parts,laser engraving,laser marking,packaging,printing and other industries. See application video by making use of DAVI CO2 Laser tube on these material: cloth,wood,paper and PE,etc.

    10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode

     

    D20 specification and working condition

     

    System Performance

    Index

    Model D20
    Wavelength 10.6μm
    Continuous rated output Power 20w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1) parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC
    Specification Weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm

    (14.1×3.64×5.59in.)

    Input voltage 36VDC±2%,max average current is 9A,peak current that power supply could hold up is 14A,it can’t be more than 1mS.
    Max Heat Load ﹤430w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non condensation
    Storage environment -10℃~60℃(14℉~140℉),No condensation

    1. Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.

    2. Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)

    3. Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     

     

     

    10.6um Wavelength Co2 Laser Tube Replacement High Durability Tem00 Mode

    D20 Signal Interface Description and Connector Pinout

     

    PIN NO SIGNAL DESCRIPTION

    1

    ( PWM+ orange white)

    RF Enable

    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;

    This input turns on the laser. See Pin7,Control Enable

     

    2(+15V orange)

    +15VDC±0.5VDC,Max output for customer using is 0.25A

     

    3

    (Laser green white)

    Laser status output

    TTL logic output,1=LASER OK,0=LASER Fault;

    When fault is not detected ,output valid

    In case of temperature failure, the case temperature is below 60℃.

     

    4

    (Temp Blue)

    Temperature status output

    TTL logical output,1=normal temperature,0= Ultra high temperature;

    When the case temperature is below 60℃, the output is valid.

    5

    (Volt blue white )

    Power and voltage status output

    TTL logical output;1=normal voltage;

    0= abnormal voltage;

     

    6(GND Green) For internal use. must ground connected

    7

    (Enable brown white)

    Control enable

    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown

    This input must be valid before RF is enabled to turn on the laser.

     

    8(GND Brown) GND

    Attention:

     

    1) The connector uses the RJ-45 type.

    2) The color noted on pin can correspond to the cable color our company sent together with the product.

     

     

    Competitive Advantages of DAVI company:

    1,Favourable price and longer warranty period time

    2,Sales accounted for 60% of the Chinese market

    3,Excellent R&D team provides the most high-quality technical support and after-sales maintenance services,operation video etc.

    4,Repair and refill the tube

    5,Repair rate of 30w laser is only 5% in 2017

    6,CE and three Patent certificates ,CNAS, Embedded control software registration certificate etc.

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: tracy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.