Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home ProductsRF CO2 Laser Tube

30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001

30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001

    • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001
    • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001
    • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001
    • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001
    • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001
  • 30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001

    Product Details:

    Place of Origin: China
    Brand Name: DAVI
    Certification: ROHS,CE,ISO9001,FDA
    Model Number: D-30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 UNIT
    Price: Negotiation
    Packaging Details: 61x29x25cm(LxWxH)
    Delivery Time: 7 WORK DAYS
    Payment Terms: D/P, L/C, T/T, Western Union, MoneyGram
    Supply Ability: 1000 units per month
    Contact Now
    Detailed Product Description
    Material: Metal Sealed,ceramic Core Cooling: Air Cooled
    Model Of Quality: M2﹤1.2 Gross Weight: 6.6kg

    30W Air Cooling RF CO2 Laser tube
     

    Chinese Independent research and development factory

    DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.

     

    Continuous investments in research and innovation are the fundamental drivers of our growth, allowing us to develop new technologies and perfect those currently existing for laser Marking machines. We serve our customers and industrial partners with our heads, but also and above all with our hearts.

     

    For effortless lasering of wood, acrylics, steel and paper!

    Our laser machines are suitable for the engraving and cutting of many types of materials, ranging from metal to plastics, and from leather to glass.

     

    30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001

    D-30 specification and working condition

     

     

    System Performance
    Index

    Model D-30
    Wavelength 10.6μm
    Continuous rated output Power 30w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1)parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC
    Specification weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm
    (14.1×3.64×5.59in.)

    Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
    Max Heat Load ﹤575w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non-condensation
    Storage environment -10℃~60℃(14℉~140℉),Non-condensation

    1. Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.

    • Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
    • Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     

    D-30 Signal Interface Description and Connector Pinout

     

    PIN NO SIGNAL DESCRIPTION

    1
    ( PWM+ orange white)

    RF Enable
    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;
    This input turns on the laser. See Pin7,Control Enable
     

    2(+15V orange) +15VDC±0.5VDC,Max output for customer using is 0.25A

    3
    (Laser green white)

    Laser status output
    TTL logic output,1=LASER OK,0=LASER Fault;
    When fault is not detected ,output valid.
    In case of temperature failure, the case temperature is below 60℃.
     

    4
    (Temp Blue)

    Temperature status output
    TTL logical output,1=normal temperature,0= Ultra high temperature;
    When the case temperature is below 60℃, the output is valid

    5
    (Volt blue white )

    Power and voltage status output
    TTL logical output;1=normal voltage;
    0= abnormal voltage

    6(GND Green) For internal use. must ground connected

    7
    (Enable brown white)

    Control enable
    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown
    This input must be valid before RF is enabled to turn on the laser.
     

    8(GND Brown) GND

    Attention:
     
    1. The connector uses the RJ-45 type.
    2. The color noted on pin can correspond to color of the cable color our company sent together with the product.

    30W Air Cooling RF CO2 Laser Tube Metal Sealed Ceramic Core ISO9001

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: sarah

    Tel: +8617716524131

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.