Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home ProductsRF CO2 Laser Tube

55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage

55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage

    • 55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage
    • 55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage
    • 55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage
  • 55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage

    Product Details:

    Place of Origin: Beijing, China
    Brand Name: DAVI
    Certification: CE,ROHS,ISO9001,FDA
    Model Number: D55

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 76x28x24cm(LxWxH) Carton Package
    Payment Terms: T/T
    Supply Ability: 500units/per month
    Contact Now
    Detailed Product Description
    Input Voltage: 48V Beam Diameter: 1.8±0.2mm
    Beam Quality: M²<1.2 Output Power: 55W
    Working Frequency: 0-25KHz Max Heat Loaded: 1200 W

    D55 RF CO2 Laser Tube, metal body, 10.6μm Wave length, 

    High beam quality, Air cooling

     


     

    D55 Specifications and using condition

     

    Characteristics Specified value
    Wavelength 10.6um
    Output Power 55W
    Power Stability <±5%
    Mode >98% TEM00
    Beam Size 1.8±0.2mm
    Beam Divergence 7.5±0.5 mrad
    Beam Quality M²<1.2
    Polarization >100 to 1 fixed linear
    Modulation TTL up to 25kHz
    Weight 12kg
    Input voltage 48 VDC <±2% regulation <1%P-P Noise/Ripple
    Input DC current ≤20A
    Ambient Air Temperature 5℃ to 40℃
    Altitude <6,500 ft.(2,000m)
    Humidity Non-condensing

    Those characteristics are guaranteed ;all other stated characteristics are typical.

    Specifications are subject to change without notice.

     
    55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage
     

    D55Signal Interface and Pin Description

    PIN NO SIGNAL DESCRIPTION
    1(PWM Orange and white)

    RF Enable

    TTL logic input

    1=RF ON,0=RF OFF;1KΩ impedance.

    This input turns on the laser.(See also Pin 7,Control Enable, below)

    2(+15V Orange) +15 VDC±0.5VDC,0.25 A Max output for customer use
    3(Laser Green and white)

    Laser ok

    TTL logic output,1=LASER OK,0=LASER Fault;

    Output is asserted when no faults(SWR, Temp or Volt.)are detected

    4(Temp Blue)

    Temperature OK

    TTL logical output,1=Temp ok,0=Temp fault;

    Output is asserted when temperature is below 60℃

    5(Volt Blue and white)

    Power and voltage OK

    TTL logical output;1= voltage ok,0=voltage fault;

    Output is asserted when DC supply voltage is below max. value

    6(GND Green) For internal use. must be grounded
    7(Enable Brown and white)

    Control enable

    TTL Logical input;1= Laser control enable,0= Laser controlled disabled

    This input must be asserted before RF enable can be used to turn on the laser.

    8(GND Brown)

    GND

    Attention:

    • The connector uses the RJ-45 type
    • These specifications are subject to change

     

    55W RF CO2 Laser Tube 10.6μM Wave Length Metal Body Air Cooling 48V Input Voltage

     

     

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: tracy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.