Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home Products30W Laser Tube

Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity

Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity

    • Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity
    • Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity
    • Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity
  • Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity

    Product Details:

    Place of Origin: Beijing, China
    Brand Name: DAVI
    Certification: CE, ROHS, ISO9001, FDA
    Model Number: D30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 61x29x25(LxWxH) Carton Package
    Payment Terms: T/T
    Supply Ability: 500units/per month
    Contact Now
    Detailed Product Description
    Polarization: >100 To 1 Fixed Linear Wavelength: 10.6um
    Mode: >98% TEM₀₀ Humidity: Non-condensing
    Beam Divergence: 7.5±0.5 Mrad Rated Power: ≥30W
    Weight: 6.6kg(14.5lbs) Dimension(L*W*H): 61x29x25cm

    Air Cooling RF CO2 Ceramic Core Laser tube Output Power 30W​

     

     Model D30 Laser Specification working condition

    Model D30
    Wavelength 10.55 µm to 10.63µm
    CW Output Power ≥30W
    Power Stability <±5%
    Mode >98%TEM00
    Beam Size 1.8±0.2㎜
    Beam Divergence 7.5±0.5 mrad
    Mode Quality M²<1.2
    Polarization >100 to 1 fixed linear
    Weight of Laser System 11.5 1bs(5.2kg)
    Input voltage

    48 VDC <±2% regulation

    <1%P-P Noise/Ripple

    Input DC current ≤12A
    Ambient Air Temperature 5 to 40
    Altitude <6,500 ft.(2,000m)
    Humidity Non-condensing

     

    Attention:

    1. Laser power is tested according to the temperature of laser which is 25,everytime the laser temperature rises 1℃, the output power will reduce 1%.

    2. Definition of stabilization: ±(Pmax-Pmin)/(2Pmax).

    3. Testing condition of stabilization: Warming up about 10mins, controlling duty cycle constantly, under the normal operating environment.

    D30 Laser signal wiring method & Note

     

    PIN NO SIGNAL DESCRIPTION
    1(PWM Orange and white)

    RF Enable

    TTL logic input

    1=RF ON,0=RF OFF;1KΩ impedance.

    This input turns on the laser. (See also Pin 7, Control Enable, below)

    2(+15V Orange) +15 VDC±0.5VDC,0.25 A Max output for customer use
    3(Laser Green and white)

    Laser ok

    TTL logic output,1=LASER OK,0=LASER Fault;

    Output is asserted when no faults (SWR, Temp or Volt.) are detected

    4(Temp Blue)

    Temperature OK

    TTL logical output,1=Temp ok,0=Temp fault;

    Output is asserted when temperature is below 60

    5(Volt Blue and white)

    Power and voltage OK

    TTL logical output;1= voltage ok,0=voltage fault;

    Output is asserted when DC supply voltage is below max. value

    6(GND Green) For internal use. must be grounded
    7(Enable Brown and white)

    Control enables

    TTL Logical input;1= Laser control enable,0= Laser controlled disabled

    This input must be asserted before RF enable can be used to turn on the laser.

    8(GND Brown)

     

    GND

    Attention:

    1) The connector uses the RJ-45 type

    2) These specifications are subject to change

     

     

    Air Cooling RF CO2 Ceramic Core 30W Laser Tube 10.6um Wavelength Non Condensing Humidity

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: amy

    Tel: +8617864735559

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.