Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home Products30W Laser Tube

Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

Product Details:

Place of Origin: Beijing, China
Brand Name: DAVI
Certification: CE,ROHS,ISO9001,FDA
Model Number: D30

Payment & Shipping Terms:

Minimum Order Quantity: 1 Unit
Price: Negotiation
Packaging Details: 61x29x25cm(LxWxH) Carton Packag
Payment Terms: D/P, L/C, T/T, Western Union, MoneyGram
Supply Ability: 1000 units per month
Contact Now
Detailed Product Description
Wavelength: 10.55um-10.63um/9.2um Cooling: Air Cooling/ Water Cooling
Beam Diameter: 1.8±0.2mm Gross Weight: 6.6kg
Dimension(L*W*H): 357*92.5*142mm

 

Ceramic laser tube D30 stable machine perfect working in laser systems

 

Chinese Independent research and development factory

DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.

 

Continuous investments in research and innovation are the fundamental drivers of our growth, allowing us to develop new technologies and perfect those currently existing for laser Marking machines. We serve our customers and industrial partners with our heads, but also and above all with our hearts.

 

For effortless lasering of wood, acrylics, steel and paper.

Our laser machines are suitable for the engraving and cutting of many types of materials, ranging from metal to plastics, and from leather to glass.


Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

D30 specification and working condition

 

 

 

 

 

 

System Performance

Index

Model D30
Wavelength 9.2μm/10.2μm/10.6μm
Continuous rated output Power

 

30w

Power stability rate ±5%
Mode of quality M2﹤1.2
Beam Diameter 1.8±0.2mm
Beam divergence angle 7.5±0.5m full angle
Degree of polarization Linear polarization(﹥100:1)parallel to width direction
Working frequency &duty cycle 0~25KHZ,0~100%DC

 

 

 

 

 

 

Specification

weight 6.6kg(14.5lbs)
Dimension L x W x H

357×92.5×142mm

(14.1×3.64×5.59in.)

 

Input voltage

48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
Max Heat Load ﹤575w
Maximum hull temperature ﹤60℃(140℉)
Working environment temperature 5℃~40℃(41℉~104℉)
Working height ﹤2000m(6,500ft.)
Humidity Non-condensation

 

Storage environment

-10℃~60℃(14℉~140℉),Non-condensation
  • Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
  • Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
  • Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

 

Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

 

D30 Signal Interface Description and Connector Pinout

PIN NO SIGNAL DESCRIPTION

 

 

1

( PWM+ orange white)

RF Enable

TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;

This input turns on the laser. See Pin7,Control Enable

 

 

2(+15V orange)

+15VDC±0.5VDC,Max output for customer using is 0.25A

 

 

3

(Laser green white)

Laser status output

TTL logic output,1=LASER OK,0=LASER Fault;

When fault is not detected ,output valid.

In case of temperature failure, the case temperature is below 60℃.

 

 

 

4

(Temp Blue)

Temperature status output

TTL logical output,1=normal temperature,0= Ultra high temperature;

When the case temperature is below 60℃, the output is valid

5

(Volt blue white )

Power and voltage status output

TTL logical output;1=normal voltage;

0= abnormal voltage

6(GND Green) For internal use. must ground connected

 

 

7

(Enable brown white)

Control enable

TTL Logical input;1= Laser control enable,0=Laser controlled shutdown

This input must be valid before RF is enabled to turn on the laser.

 

8(GND Brown) GND

Attention:

1. The connector uses the RJ-45 type.

2. The color noted on pin can correspond to color of the cable color our company sent together with the product.

Aluminum Material 30W Laser Tube Source Ceramic Laser Tube 6.6kg Gross Weight

Contact Details
Beijing Dawei Laser Technology Co., Ltd.

Contact Person: wendy

Send your inquiry directly to us (0 / 3000)

Beijing Dawei Laser Technology Co., Ltd.
No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
Tel:86-10-89788986
Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.