Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home ProductsMetal CO2 Laser Tube

Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

    • Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance
    • Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance
  • Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

    Product Details:

    Place of Origin: Beijing, China
    Brand Name: DAVI
    Certification: CE,ROHS,ISO9001,FDA
    Model Number: D30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 61x29x25cm(LxWxH) Carton Package
    Payment Terms: T/T, L/C, D/P, Western Union, MoneyGram
    Supply Ability: 500 units per month
    Contact Now
    Detailed Product Description
    Degree Of Polarization: Linear Polarization>100:1 Max Heat Load: <575w
    Beam Diameter: 1.8+-0.2mm Dimension L X W X H: 61x29x25cm(LxWxH)
    Model: D-30 Duty Cycle: 0-100%

    Aluminum material body stable apperanence constant wave Metal Co2 laser tube

     

    Introduction of DAVI laser company:

     

    Beijing Dawei Laser Technology Co., LTD. is the largest RF Co2 laser manufacturer in China. We have more than ten years' experience in R&D and production of the laser and optics field. We have also obtained CE FDA ROHS ISO9001 and three patent certificates. With so many years of laser production experience, we will certainly provide you with high quality products and technical support,24 hours after-sales maintenance services, and attractive favorable prices.

     

     

    Model D-30 Laser Specification and working condition

     

     

     

     

     

    System Performance
    Index

    Model D-30/D-30i
    Wavelength 10.6/9.3/10.2μm
    Continuous rated output Power 30w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1)parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC

     
     
     
     
     
     
     
    Specification

    weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm
    (14.1×3.64×5.59in.)

    Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
    Max Heat Load ﹤575w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non-condensation
    Storage environment -10℃~60℃(14℉~140℉),Non-condensation

    1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
    2.Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
    3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     
    D-30 Signal Interface Description and Connector Pinout

    PIN NO SIGNAL DESCRIPTION

     

     

    1
    ( PWM+ orange white)

    RF Enable
    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;
    This input turns on the laser. See Pin7,Control Enable

     
    2(+15V orange)

    +15VDC±0.5VDC,Max output for customer using is 0.25A

     

     

    3
    (Laser green white)

    Laser status output
    TTL logic output,1=LASER OK,0=LASER Fault;
    When fault is not detected ,output valid.
    .

     

     

    4
    (Temp Blue)

    Temperature status output
    TTL logical output,1=normal temperature,0= Ultra high temperature;
    When the case temperature is below 60℃, the output is valid

    5
    (Volt blue white )

    Power and voltage status output
    TTL logical output;1=normal voltage;
    0= abnormal voltage

    6(GND Green) For internal use. must ground connected

     

     

    7
    (Enable brown white)

    Control enable
    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown
    This input must be valid before RF is enabled to turn on the laser.
     

    8(GND Brown) GND

    Attention:
    1.The connector uses the RJ-45 type.
    2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

     

     

    Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

    Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: wendy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.