Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home ProductsRF CO2 Laser Tube

D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component

D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component

    • D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component
    • D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component
    • D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component
  • D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component

    Product Details:

    Place of Origin: Beijing, China
    Brand Name: DAVI
    Certification: CE,ROHS,ISO9001,FDA
    Model Number: D30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 61x29x25cm (LxWxH) Carton Package
    Payment Terms: T/T
    Supply Ability: 500 units per month
    Contact Now
    Detailed Product Description
    Model: D-30 Cooling Way: Air Cooling
    Beam Diameter: 1.8+-0.2mm Dimension L X W X H: 61x29x25cm(LxWxH)
    Wave Length: 10.6μm Working Frequency: 0-25 KHz

    RF CO2 metal laser tube 30W,

    Stable output power, High beam quality, small size for Medical beauty equipment

     

     

     

    Model D-30 Laser Specification and working condition

     

     

     

     

     

     

    System Performance
    Index

    Model D-30
    Wavelength 10.6μm
    Continuous rated output Power 30w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1)parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC

     
     
     
     
     
     
     
    Specification

    weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm
    (14.1×3.64×5.59in.)

    Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
    Max Heat Load ﹤575w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non-condensation
    Storage environment -10℃~60℃(14℉~140℉),Non-condensation

    1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
    2.Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
    3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     
    D-30 Signal Interface Description and Connector Pinout

    PIN NO SIGNAL DESCRIPTION

     

     

    1
    ( PWM+ orange white)

    RF Enable
    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;
    This input turns on the laser. See Pin7,Control Enable

     
    2(+15V orange)

    +15VDC±0.5VDC,Max output for customer using is 0.25A

     

     

    3
    (Laser green white)

    Laser status output
    TTL logic output,1=LASER OK,0=LASER Fault;
    When fault is not detected ,output valid.
    .

     

     

    4
    (Temp Blue)

    Temperature status output
    TTL logical output,1=normal temperature,0= Ultra high temperature;
    When the case temperature is below 60℃, the output is valid

    5
    (Volt blue white )

    Power and voltage status output
    TTL logical output;1=normal voltage;
    0= abnormal voltage

    6(GND Green) For internal use. must ground connected

     

     

    7
    (Enable brown white)

    Control enable
    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown
    This input must be valid before RF is enabled to turn on the laser.
     

    8(GND Brown) GND

    Attention:
    1.The connector uses the RJ-45 type.
    2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

     

     

    D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component

    D-30 RF Co2 Laser Metal Tube Stable Power Medical Beauty Equipment Component

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: tracy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.