|Place of Origin:||China-Beijing|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||762*145*164mm wooden package|
|Delivery Time:||500units/per month|
|Payment Terms:||L/C, T/T, D/A, Western Union|
Duty Cycle 0 - 60% Co2 Laser Metal Tube , RF Co2 Laser Tube For Non Metal Materials
General knowledge about laser technology
The concept of a laser was first invented by Charles Townes and Arthur Schawlow in 1958 while working at Bell Labs, but first laser was not built until 1960 by Theodore Maiman. Since that time many improvements and innovations have occurred, and today there are thousands of lasers being used in medical, industrial, telecommunication and defense applications. A laser differs from other light sources (flame, flashlight, lightbulb or LED) in that the light it produces is very directional or coherent. This allows the light to project in a beam or narrow cylinder instead of randomly illuminating in all directions simultaneously. Lasers also emit light over small ranges or at single wavelengths. The wavelengths can be attributed to colors of the light and are usually based on the laser type.
CO2 lasers can emit at 10.55um- 10.63um and 9.3um which is very deep in the infrared.
Leading supplier of Metal RF co2 laser tubes in China
DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.
Application on all kinds of non-metal,like wood,paper,acrylics,leather,PET and so on
Our laser machines are suitable for the engraving and cutting of many types of materials, ranging from metal to plastics, and from leather to glass.
M100 Laser specifications and using conditions
|Average power range||10-100w|
|Pulse energy range||5-200mj|
|Pulse rise and fall time||<90us|
|Stability of beam pointing||<200 urad|
|Divergence||<11.0mrad Full angle|
|Duty cycle range||0-60%|
|DC input Voltage||48V±1%|
|DC inout Current||50A,peak value:100A|
|Cooling way||water cooling|
|Environment temperature||5℃ to 40℃|
|Relative humidity||<95% non-condensing|
M100 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
Modulated input signal
|This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and pin16
|RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1)48V 50A power supply,need to GND
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4) The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Competitive Advantages of machine:
1, 3-5 years Long lifetime, Stable machine and mode quality
2, All metal body and very firm
3, Small size easy to carry
4, Quick response time nanosecond count
5, RF discharge, the top of machine covered with circuit
Competitive Advantages of company:
1,Favourable price and longer warranty period time
2,Sales accounted for 50% of the Chinese market
3,Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4,Repair and refill the tube
5,CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.
Contact Person: sarah