|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||885*320*350mm(LxWxH) carton package|
|Delivery Time:||5 working days after got payment|
|Payment Terms:||Western Union, L/C, T/T|
|Supply Ability:||500 units/per month|
|Power Stability Rate:||<±5%||Maximum Hull Temperature:||<60 Degree|
|Duty Cycle:||0-100%||Material:||All Made Of Ceramic|
Air cooled mode all made of ceramic output higher than 100w for medical and marking
Industrial-grade reliability and support
In demanding manufacturing applications, uptime and lowest cost of operation are paramount. That’s why every aspect of the design, manufacturing, and field servicing of our lasers is specifically targeted to maximize product uptime and increase throughput. Our worldwide service and technical support infrastructure will ensure optimum laser performance and highest reliability in your production line.
Light, when used as a manufacturing tool, is fascinating and compelling; it offers virtually infinite potential in material processing applications, which are as broad as the technologies enabled by them.
Application on all kinds of non-metal,like wood,paper,acrylics,leather,PET and so on
Our laser machines are suitable for the engraving and cutting of many types of materials, ranging from metal to plastics, and from leather to glass.
T100 Specifications and using condition
|Beam Divergence Angle||<5.2mR|
T100 Laser signal wiring method&Notes
|RJ45 Connector||Wiring instruction||Signal instruction|
Correspond marking or cutting card of PWM positive signal
2 and 6 short circuit
Laser status output
TTL Logical output:0=Laser ok,1=Laser fault
TTL Logical input:0=laser control enabled,1=Laser control off
|Correspond marking or cutting card of PWM signal ground||
1) 48V 30A power supply required grounding
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
4) We suggest that the front and back end of the laser shouldn’t be all fixed at the same time, avoid the deformation of the cavity of the laser cavity due to the stress caused by the heat expansion and shrinkage of the material
5) The fan is inhaled, there must be sufficient space(greater than 3CM)around the radiator to heat the air,clean the fan in time to ensure good ventilation.
If there are any problems during the usage of the laser, please contact us for your timely solution.
For Medical treatment
-CO2 Fractional Laser Scare Removal Skin Resurfacing Device
-CO2 laser therapy
-RF Stretch Marks Removal CO2 Fractional Laser Machine
-RF Tube Laser Generator Vaginal Tightening Laser
-Cosmetology surgery apparatus
Contact Person: amy