|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Delivery Time:||7 work days|
|Payment Terms:||T/T, D/P, L/C, Western Union, MoneyGram|
|Supply Ability:||300 Units per Month|
|Average Output Power:||150W||M²-Beam Quality:||﹤1.5|
|The Stability Of The Beam Pointing:||﹤200μrad||Color:||Blank|
Metal Tube 150w For Industrial Marker manufacturing machines laser co2 source
Beijing Dawei Laser Technology Co., Ltd. is a prefessional manufacturer of metal Rf CO2 laser tubes for more than 10 years . The company has an excellent R&D team to strive for excellence of high technology in laser area,we dedicate to produce and provide high quality products for the domestic and international customers with the best technical support and after-sales maintenance services.
Competitive Advantages of product M150:
1, 3-5 years Long lifetime, Stable machine and mode quality
2, All metal body and very firm
3, Small size easy to carry
4, Quick response time nanosecond count
5, RF discharge, the top of machine covered with circuit
M150 Metal CO2 Laser Tube Product Picture
M150 specification and working condition
|Specification parameter||Average output power||150W|
|Average power range||10-150W|
|Typical Properties||Peak power||375W|
|Pulse energy range||5-300mJ|
|Pulse rise and fall time||﹤90|
|Power stability rate||﹤±10%|
|The stability of the beam pointing||﹤200μrad|
|Beam cycle degree||﹤1.2:1|
|Beam divergence angle||﹤9mrad|
|Duty cycle adjustable range||0-60%|
|Degree of polarization||﹥100:1/Linear polarization|
|Power parameter||DC input voltage||48v±1%|
|DC input current||Max mean square root:50A,peak value:100A|
|Cooling water parameter||Cooling water speed||5.7L/min|
|Cooling water temperature range||10℃—35℃|
|Water Rigidity(CaCO3)||﹤250 mg/L|
|Environment parameter||Environment temperature||5℃—40℃|
|Relative Humidity<95% non condensation||﹤95% non condensation|
(1)Power test condition: Power pulse width 600μs,duty cycle 60%,25℃ cooling water. As temperature rise,the output power will decline.
(2)Power stability is defined as plus or minus ±(Pmax - Pmin)/2Pmax .
|M150 Signal Interface Description and Connector Pinout|
|DB25connector||Connect instruction||Signal instruction|
|7(+) and 20(-)||modulation input signal
||This teminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should be between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and 16
|Enable radio frequency amplifier.Digital signal is effect when it is low, low level voltage input will enable the RF amplifier work.|
1. 48V 50A power supply, the power must have GND.
2. Pay attention to the dust proof of the laser output window,prevent the lens burn caused by dust pollution, especially when the output window is upward.
3. Prevent the back reflection of laser,any back reflection will cause the damage of laser.
4. We suggest to fix either front end or back end of the laser tube, but don’t fix them both when you assemble, the purpose is to prevent the laser cavity shape distortion being caused by heat-expansion and cold-contraction during use.
5. This laser module is water cooling , please run the water cooling machine before the laser starts to work.
When you have other questions in the using process, please contact with us for solution on time .
Contact me if you need it, thank you very much.
Contact Person: sarah