|Place of Origin:||Beijjing, China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||Carton Package|
|Payment Terms:||T/T, D/P, L/C, Western Union, MoneyGram|
|Supply Ability:||500 units/per month|
|Power Stability:||+-5%||Cooling Way:||Air Cooled|
Middle power 70w RF Co2 laser tube for engraving flying marking machine high speed
Company overview and something about us
Beijing Dawei Laser Technology Co., Ltd. is technology enterprise composed by excellent talents who know laser, optics, machine,computer well. We have more than ten years’ experience in R&D and production of the Laser and are committed to production and R&D of RF co2 laser. Our products are applied to medical treatment, cosmetology, electronic component, mechanical parts, packaging and printing and other industries. Beijing Dawei Laser Technology Co., Ltd. is a joint stock high - paying technology enterprise composed by excellent talents who know laser, optics, machine,computer well. We have more than ten years’ experience in R&D and production of the Laser and are committed to production and R&D of RF co2 laser. Our products are applied to medical treatment, cosmetology, electronic component, mechanical parts, packaging and printing and other industries.
We can be the unique in the same industry based on the business philosophy of “profession,honesty,trustworthy”, the service purpose of “taking the most reasonable price,most perfect service to provide the best products” and the enterprise's goal of “providing first-class products and services”, by virtue of professional technical personnel modernized management system, diligent and dedicated marketing team with arduous pioneering and good governance.
D70 specification and working condition
|Continuous rated output Power||70W|
|Power stability rate||± 5%|
|Mode of quality||M2﹤1.3|
Beam divergence angle(mR)
|0 - 100%DC|
Max heat load
1. Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
2. Definition of stabilization: ±(Pmax－Pmin)/(2Pmax)
3. Testing condition of stabilization: Warming up about 10mins, controlling duty cycle constantly, under the normal operating environment.
D70 Signal Interface Description and Connector Pinout
|PIN NO||SIGNAL DESCRIPTION|
TTL logic input ；1=RF ON,0-RF OFF；1KΩ impedance. This input turns on the laser. See Pin 7,Control Enable
|2||+15 VDC±0.5VDC,0.25 A Max output for customer using|
Laser status output
TTL logic output,1=LASER OK,0=LASER Fault ,ⅠOH =-0.4mA,ⅠOL=8mA
Output is asserted when no faults(SWR,Temp. or Volt) are detected
The temperature fault will occur at case temperature approximately 80℃
TTL logic output；1=Temperature OK,0=Temperature Fault;ⅠOH =-0.4mA,ⅠOL=8mA
Output is asserted when temperature is below the 60℃ case temperature warning level
TTL logic input；1=Voltage OK,0=Voltage Fault; ⅠOH =-0.4mA,ⅠOL=8mA
Output is asserted when DC supply voltage(VDD) is between 43VDC﹤VDD﹤55VDC
|6||Internal Coherent use; must be grounded by OEM|
TTL logic input；1=Laser Control Enabled,0=Laser Control Disabled;
This input must be asserted before RF enable can be used to turn on laser
|8||Customer Logic Ground for all interface signals|
1, Connector used is RJ-45 tupe.
2, These specifications are subject to change.
Hope we can solve your problems,looking forward the coorperation between us.Thanks.
Contact Person: sarah