Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home Products30W Laser Tube

Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design

Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design

    • Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design
    • Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design
    • Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design
  • Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design

    Product Details:

    Place of Origin: Beijing, China
    Brand Name: DAVI
    Certification: CE,ROHS,ISO9001,FDA
    Model Number: D-30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 61x29x25cm(LxWxH) Carton Package
    Payment Terms: T/T
    Supply Ability: 500 Units Per month
    Contact Now
    Detailed Product Description
    Model: D-30 Dimension: 357*92.5*142 Mm (LxWxH)
    Input Voltage: 48V Beam Quality: M²<1.2
    Humidity: No Condensation Cooling Way: Air Cooling

     

    10.6 μm  30W RF CO2 metal Laser tube  stable power  short cavity design High beam quality

     

     

    Access Laser’s mission is to create laser solutions that deliver the optimum combination of performance and price, without compromise. By developing families of lasers, each configurable with just the right mix of options and features to maximize value and capability, the team at Access Laser delivers solutions matched to our customers’ needs.

     Model D-30 Laser Specification and Working condition

     

     

     

     

     

     

    System Performance

    Index

    Model D-30/D-30i
    Wavelength 10.6/9.3/10.2μm
    Continuous rated output Power 30w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1)parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC

     
     
     
     
     
     
     
    Specification

    weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm

    (14.1×3.64×5.59in.)

    Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
    Max Heat Load ﹤575w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non-condensation
    Storage environment -10℃~60℃(14℉~140℉),Non-condensation

    1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
    2.Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
    3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

              
    D-30 Signal Interface Description and Connector Pinout

    PIN NO SIGNAL DESCRIPTION

     

     

    1( PWM+ orange white)

    RF Enable

    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;

    This input turns on the laser. See Pin7,Control Enable

    2(+15V orange)

    +15VDC±0.5VDC,Max output for customer using is 0.25A

     

     

    3(Laser green white)

    Laser status output

    TTL logic output,1=LASER OK,0=LASER Fault;

    When fault is not detected ,output valid.

     

     

    4(Temp Blue)

    Temperature status output

    TTL logical output,1=normal temperature,0= Ultra high temperature;

    When the case temperature is below 60℃, the output is valid

     

    5(Volt blue white )

    Power and voltage status output

    TTL logical output;1=normal voltage;

    0= abnormal voltage

    6(GND Green) For internal use. must ground connected

     

     

    7(Enable brown white)

    Control enable

    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown

    This input must be valid before RF is enabled to turn on the laser.

    8(GND Brown) GND

    Attention:
    1.The connector uses the RJ-45 type.
    2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

     

     

     

    Factory overview pictures:

     

    DAVI Laser’s mission is to create laser solutions that deliver the optimum combination of performance and price, without compromise. By developing families of lasers, each configurable with just the right mix of options and features to maximize value and capability, the team at Davi Laser delivers solutions matched to our customers’ needs.

     

    Our industrial laser products combine high performance with 24/7 reliability, providing cost effective solutions for global manufacturing markets. From every day industry processes like cutting, welding, marking and coding, these high reliability lasers are also used daily in applications such as soft tissue dental surgery and dermatology skin resurfacing.


    Precision 10.6μM 30W CO2 RF Metal Laser Tube Stable Power Short Cavity Design

     

     

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: tracy

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.