|Place of Origin:||China-Beijing|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||600x280x230mm(LxWxH) Carton|
|Delivery Time:||In 5 working days after got payment|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||500 units/per month|
|Cooling Way:||Air Or Water Cooled||Material:||Aluminum|
9.3um wavelength Medical CO2 laser tube for beauty machine longer life time
CO2 lasers can emit at 10.55um- 10.63um and 9.3um 10.2 which is very deep in the infrared.
Supplier of Metal RF co2 laser tubes in Beijing
DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.
Continuous investments in research and innovation are the fundamental drivers of our growth, allowing us to develop new technologies and perfect those currently existing for laser cutting machines. We serve our customers and industrial partners with our heads, but also and above all with our hearts
D20i Specifications and using condition
|Beam Divergence||7.5±0.5 mrad|
|Polarization||>100 to 1 fixed linear|
|Modulation||TTL up to 25kHz|
|Input voltage||36 VDC <±2% regulation <1%P-P Noise/Ripple|
|Input DC current||≤9A|
|Ambient Air Temperature||5℃ to 40℃|
Those characteristics are guaranteed ;all other stated characteristics are typical.
Specifications are subject to change without notice.
D20i Signal Interface and Pin Description
|PIN NO||SIGNAL DESCRIPTION|
|1(PWM Orange and white)||
TTL logic input
1=RF ON,0=RF OFF；1KΩ impedance.
This input turns on the laser.(See also Pin 7,Control Enable, below)
|2(+15V Orange)||+15 VDC±0.5VDC,0.25 A Max output for customer use|
|3(Laser Green and white)||
TTL logic output,1=LASER OK,0=LASER Fault;
Output is asserted when no faults(SWR, Temp or Volt.)are detected
TTL logical output,1=Temp ok,0=Temp fault;
Output is asserted when temperature is below 60℃
|5(Volt Blue and white)||
Power and voltage OK
TTL logical output;1= voltage ok,0=voltage fault;
Output is asserted when DC supply voltage is below max. value
|6(GND Green)||For internal use. must be grounded|
|7(Enable Brown and white)||
TTL Logical input；1= Laser control enable,0= Laser controlled disabled
This input must be asserted before RF enable can be used to turn on the laser.
1) The connector uses the RJ-45 type
2) These specifications are subject to change
Advantages of machine:
1, 3-5 years Long lifetime, Stable machine and mode quality
2, All metal body and very firm
3, Small size easy to carry
4, Quick response time nanosecond count
5, RF discharge, the top of machine covered with circuit
Advantages of company:
1, Favourable price and longer warranty period time
2, Sales accounted for 50% of the Chinese market
3, Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4, Repair and refill the tube
5, CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.
Contact Person: tracy