Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Home ProductsMetal CO2 Laser Tube

Tem00 Mode Metal Co2 Laser Tube Air Cooled For Fractional Marking Engraving

Tem00 Mode Metal Co2 Laser Tube Air Cooled For Fractional Marking Engraving

Tem00 Mode Metal Co2 Laser Tube Air Cooled For Fractional Marking Engraving

Product Details:

Place of Origin: China,Beijing
Brand Name: DAVI
Certification: CE,ISO9001
Model Number: D30

Payment & Shipping Terms:

Minimum Order Quantity: 1 Unit
Price: Negotiation
Packaging Details: 60cm*28cm*23cm
Payment Terms: T/T, L/C, D/P, Western Union, MoneyGram
Supply Ability: 500 units per month
Contact Now
Detailed Product Description
Weight: 7.5kg Output Power: >40w
Working Altitude: <2000m Dimension L X W X H: 357×92.5×142mm
Wavelength: 10.6 Interface: RJ45

Metal CO2 Laser Tube TEM00 mode perfect result for your fractional marking engraving
 

Laser Sources differ from traditional illumination sources because they produce coherent light. The illumination spectrum is often narrow band with line widths as narrow as tens of megahertz and divergence as low as fractions of milliradians. Lasers are either utilized in free space, steered with traditional optics, or the source is coupled into a fiber. In a fiber coupled orientation, the emitting fiber tip is mounted at the location of beam delivery, reducing the need for steering optics. When a laser is fiber coupled, a cone of light is produced instead of a collimated beam. 

 


Wavelength :10.6um
Highlights: Air cooled , compact size (357mm×92.5mm×142mm) ,TEM00 mode, 18 months guarantee period after delivery!

PTem00 Mode Metal Co2 Laser Tube Air Cooled For Fractional Marking Engraving

Tem00 Mode Metal Co2 Laser Tube Air Cooled For Fractional Marking Engraving 

 
                Model D30 Laser Specification and working condition
 

System Performance
Index

Model D30/D30i
Wavelength 10.6um/9.3umand 10.2μm
Continuous rated output Power 30w
Power stability rate ±5%
Mode of quality M2﹤1.2
Beam Diameter 1.8±0.2mm
Beam divergence angle 7.5±0.5m full angle
Degree of polarization Linear polarization(﹥100:1)parallel to width direction
Working frequency &duty cycle 0~25KHZ,0~100%DC
Specification weight 6.6kg(14.5lbs)
Dimension L x W x H

357×92.5×142mm
(14.1×3.64×5.59in.)

Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
Max Heat Load ﹤575w
Maximum hull temperature ﹤60℃(140℉)
Working environment temperature 5℃~40℃(41℉~104℉)
Working height ﹤2000m(6,500ft.)
Humidity Non-condensation
Storage environment -10℃~60℃(14℉~140℉),Non-condensation

1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
2.Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

 

D30 Signal Interface Description and Connector Pinout

 

PIN NO SIGNAL DESCRIPTION

1
( PWM+ orange white)

RF Enable
TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;
This input turns on the laser. See Pin7,Control Enable

2(+15V orange) +15VDC±0.5VDC,Max output for customer using is 0.25A

3
(Laser green white)

Laser status output
TTL logic output,1=LASER OK,0=LASER Fault;
When fault is not detected ,output valid.
.

4
(Temp Blue)

Temperature status output
TTL logical output,1=normal temperature,0= Ultra high temperature;
When the case temperature is below 60℃, the output is valid

5
(Volt blue white )

Power and voltage status output
TTL logical output;1=normal voltage;
0= abnormal voltage

6(GND Green) For internal use. must ground connected

7
(Enable brown white)

Control enable
TTL Logical input;1= Laser control enable,0=Laser controlled shutdown
This input must be valid before RF is enabled to turn on the laser.
 

8(GND Brown) GND

Attention:
1.The connector uses the RJ-45 type.
2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

 
 

 

Contact Details
Beijing Dawei Laser Technology Co., Ltd.

Contact Person: tracy

Send your inquiry directly to us (0 / 3000)

Beijing Dawei Laser Technology Co., Ltd.
No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
Tel:86-10-89788986
Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.