Quick Response Time 150W CO2 Laser Tube Source Water Cooled All Metal Body
|Place of Origin:|
Payment & Shipping Terms:
|Minimum Order Quantity:|
|NPUT CURRENT:||50A||BEAM DIVERGENCE ANGLE:||<12.5mrad|
|COOLING WAY:||Water Only||MODE QUALITY:||<1.5|
rf laser tube,
high power laser tube
M150 Laser specifications and using conditions
|Average power range||10-150w|
|Pulse energy range||5-300mj|
|Pulse rise and fall time||<90us|
|Power stability ||<±10%|
|Stability of beam pointing||<200 urad|
|Divergence||<11.0mrad Full angle|
|Duty cycle range||0-60%|
|DC input Voltage||48V±1%|
|DC inout Current||50A,peak value:100A|
|Cooling way||water cooling|
|Environment temperature||5℃ to 40℃|
|Relative humidity||<95% non-condensing|
M150 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
Modulated input signal
|This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and pin16
|RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1) 48V 50A power supply,need to GND
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4) The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Competitive Advantages of our Laser:
1, 3-5 years Long lifetime,Stable machine and mode quality
2, All metal body and ceramic core and very firm to use
3, Small size easy to carry
4, Quick response time nanosecond count
5, RF discharge, the top of machine covered with circuit