Beijing Dawei Laser Technology Co., Ltd.
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

10.6μm Wave length D55 RF CO2 Laser Tube Metal body High beam quality Air cooling

Product Details:

Place of Origin:Beijing, China
Brand Name:DAVI
Certification:CE,ROHS,ISO9001,FDA
Model Number:D55

Payment & Shipping Terms:

Minimum Order Quantity:1 Unit
Price:Negotiation
Packaging Details:76x28x24cm(LxWxH) Carton Package
Payment Terms:T/T
Supply Ability:500units/per month
INPUT VOLTAGE:48VBEAM DIAMETER:1.8±0.2mm
BEAM QUALITY:M²<1.2OUTPUT POWER:55W
WORKING FREQUENCY:0-25KHzMAX HEAT LOADED:1200 W


10.6μm Wave length D55 RF CO2 Laser Tube Metal body High beam quality Air cooling

10.6μm Wave length  D55 RF CO2 Laser Tube   Metal body  High beam quality  Air cooling 010.6μm Wave length  D55 RF CO2 Laser Tube   Metal body  High beam quality  Air cooling 1

 

D55 Specifications and using condition

 

CharacteristicsSpecified value
Wavelength10.6um
Output Power55W
Power Stability<±5%
Mode>98% TEM00
Beam Size1.8±0.2mm
Beam Divergence7.5±0.5 mrad
Beam QualityM²<1.2
Polarization>100 to 1 fixed linear
ModulationTTL up to 25kHz
Weight12kg
Input voltage48 VDC <±2% regulation <1%P-P Noise/Ripple
Input DC current≤20A
Ambient Air Temperature5℃ to 40℃
Altitude<6,500 ft.(2,000m)
HumidityNon-condensing

Those characteristics are guaranteed ;all other stated characteristics are typical.

Specifications are subject to change without notice.

 
 

D55 Signal Interface and Pin Description

 

PIN NOSIGNAL DESCRIPTION
1(PWM Orange and white)

RF Enable

TTL logic input

1=RF ON,0=RF OFF;1KΩ impedance.

This input turns on the laser.(See also Pin 7,Control Enable, below)

2(+15V Orange)+15 VDC±0.5VDC,0.25 A Max output for customer use
3(Laser Green and white)

Laser ok

TTL logic output,1=LASER OK,0=LASER Fault;

Output is asserted when no faults(SWR, Temp or Volt.)are detected

4(Temp Blue)

Temperature OK

TTL logical output,1=Temp ok,0=Temp fault;

Output is asserted when temperature is below 60℃

5(Volt Blue and white)

Power and voltage OK

TTL logical output;1= voltage ok,0=voltage fault;

Output is asserted when DC supply voltage is below max. value

6(GND Green)For internal use. must be grounded
7(Enable Brown and white)

Control enable

TTL Logical input;1= Laser control enable,0= Laser controlled disabled

This input must be asserted before RF enable can be used to turn on the laser.

8(GND Brown)

GND

Attention:

  • The connector uses the RJ-45 type

  • These specifications are subject to change


10.6μm Wave length  D55 RF CO2 Laser Tube   Metal body  High beam quality  Air cooling 2

Beijing Dawei Laser Technology Co., Ltd.
ADDRESS:No.1 ChaoQian Road,Science & Technoloy Park, ChangPing District, Beijing 102200 , China
Tel:86-10-89788986
EMAIL: info@dw-laser.cn
BEIJING DAWEI LASER TECHNOLOGY CO., LTD.