Wavelength 10.6um Co2 Laser Tube Kit , Co2 Laser Tube Replacement 762*162*145mm
|Place of Origin:|
Payment & Shipping Terms:
|Minimum Order Quantity:|
|COOLING WATER FOLW RATE:||5.7L/min||WORKING FREQUENCY:||0-60%|
|WAVELENGTH:||10.6um||MAX HEAT LOAD:||2400w|
|DIMENSION:||762*162*145mm||STORAGE ENVIRONMENT:||5℃ To 40℃|
laser tube replacement,
diy co2 laser tube
|M150 Signal Interface Description and Connector Pinout|
|DB25connector||Connect instruction||Signal instruction|
|7(+) and 20(-)|
modulation input signal
|This teminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should be between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and 16
|Enable radio frequency amplifier.Digital signal is effect when it is low, low level voltage input will enable the RF amplifier work.|
1. 48V 50A power supply, the power must have GND.
2. Pay attention to the dust proof of the laser output window,prevent the lens burn caused by dust pollution, especially when the output window is upward.
3. Prevent the back reflection of laser,any back reflection will cause the damage of laser.
4. We suggest to fix either front end or back end of the laser tube, but don’t fix them both when you assemble, the purpose is to prevent the laser cavity shape distortion being caused by heat-expansion and cold-contraction during use.
5. This laser module is water cooling , please run the water cooling machine before the laser starts to work.
When you have other questions in the using process, please contact with us for solution on time .
Competitive Advantages of company:
1, Favourable price and longer warranty period time
2, Sales accounted for 50% of the Chinese market
3, Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4, Repair and refill the tube
5, CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.