Beijing Dawei Laser Technology Co., Ltd.
Beijing Dawei Laser Technology Co., Ltd.

聚焦于射频CO2激光器的研究与开发

Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance

Product Details:

Place of Origin:Beijing, China
Brand Name:DAVI
Certification:CE,ROHS,ISO9001,FDA
Model Number:D30

Payment & Shipping Terms:

Minimum Order Quantity:1 Unit
Price:Negotiation
Packaging Details:61x29x25cm(LxWxH) Carton Package
Payment Terms:T/T, L/C, D/P, Western Union, MoneyGram
Supply Ability:500 units per month
DEGREE OF POLARIZATION:Linear Polarization>100:1MAX HEAT LOAD:<575w
BEAM DIAMETER:1.8+-0.2mmDIMENSION L X W X H:61x29x25cm(LxWxH)
MODEL:D-30DUTY CYCLE:0-100%
HIGH LIGHT:

20w co2 laser tube

universal laser tube replacement


Aluminum material body stable apperanence constant wave Metal Co2 laser tube

 

Introduction of DAVI laser company:

 

Beijing Dawei Laser Technology Co., LTD. is the largest RF Co2 laser manufacturer in China. We have more than ten years' experience in R&D and production of the laser and optics field. We have also obtained CE FDA ROHS ISO9001 and three patent certificates. With so many years of laser production experience, we will certainly provide you with high quality products and technical support,24 hours after-sales maintenance services, and attractive favorable prices.

 

 

Model D-30 Laser Specification and working condition

 

 

 

 

 

System Performance 
Index

ModelD-30/D-30i
Wavelength10.6/9.3/10.2μm
Continuous rated output Power30w
Power stability rate±5%
Mode of qualityM2﹤1.2
Beam Diameter1.8±0.2mm
Beam divergence angle7.5±0.5m full angle
Degree of polarizationLinear polarization(﹥100:1)parallel to width direction
Working frequency &duty cycle0~25KHZ,0~100%DC

 
 
 
 
 
 
 
Specification

weight6.6kg(14.5lbs)
Dimension L x W x H

357×92.5×142mm
(14.1×3.64×5.59in.)

Input voltage48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
Max Heat Load﹤575w
Maximum hull temperature﹤60℃(140℉)
Working environment temperature5℃~40℃(41℉~104℉)
Working height﹤2000m(6,500ft.)
HumidityNon-condensation
Storage environment-10℃~60℃(14℉~140℉),Non-condensation

1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
2.Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)
3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

 
D-30 Signal Interface Description and Connector Pinout

PIN NOSIGNAL DESCRIPTION

 

 

1
( PWM+ orange white)

RF Enable
TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;
This input turns on the laser. See Pin7,Control Enable

 
2(+15V orange)

+15VDC±0.5VDC,Max output for customer using is 0.25A

 

 

3
(Laser green white)

Laser status output
TTL logic output,1=LASER OK,0=LASER Fault;
When fault is not detected ,output valid.
.

 

 

4
(Temp Blue)

Temperature status output
TTL logical output,1=normal temperature,0= Ultra high temperature;
When the case temperature is below 60℃, the output is valid

5
(Volt blue white )

Power and voltage status output
TTL logical output;1=normal voltage;
0= abnormal voltage

6(GND Green)For internal use. must ground connected

 

 

7
(Enable brown white)

Control enable
TTL Logical input;1= Laser control enable,0=Laser controlled shutdown
This input must be valid before RF is enabled to turn on the laser.
 

8(GND Brown)GND

Attention:
1.The connector uses the RJ-45 type.
2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

 

Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance 0Constant Wave Metal CO2 Laser Tube Aluminum Material Body Stable Appearance 1

Beijing Dawei Laser Technology Co., Ltd.
ADDRESS:No.1 ChaoQian Road,Science & Technoloy Park, ChangPing District, Beijing 102200 , China
Tel:86-10-89788986
EMAIL: info@dw-laser.cn
BEIJING DAWEI LASER TECHNOLOGY CO., LTD.