|Place of Origin:||China-Beijing|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||Wooden 762*145*164mm|
|Delivery Time:||Delivery in 5days after got payment|
|Payment Terms:||D/P, Western Union, L/C, T/T|
|Supply Ability:||500units/per month|
|Wavelength:||10.6um||Power Stability Rate:||<+-10%|
|Peak Power:||250w||Working Height:||<2000m|
|Cooling Water Temperature Range:||10-35 Degree||Water Pressure:||205-520Kpa|
Pulsed mode middle power 100w RF CO2 Laser Tube 10.6um for cleaning
Biggest supplier of Metal RF co2 laser tubes in China
We increase the investment in the research continuously and adhere to the people-oriented,service-oriented for maintaining leading technology and building the long career. We are committed to spread the DaWei brand to all corners of the world and create the greatest survival value for our company.
Our CO2 lasers can emit at 10.55um- 10.63um and 9.3um 10.2um which is very deep in the infrared.
Lasers are often used in life science applications because of their unique, lower wavelength, spectral lines. CO2 lasers feature high powers with options as high as 40W making them perfectly suited for marking and engraving.
M100 Laser specifications and using conditions
|Average power range||10-100w|
|Pulse energy range||5-200mj|
|Pulse rise and fall time||<90us|
|Stability of beam pointing||<200 urad|
|Divergence||<11.0mrad Full angle|
|Duty cycle range||0-60%|
|DC input Voltage||48V±1%|
|DC inout Current||50A,peak value:100A|
|Cooling way||water cooling|
|Environment temperature||5℃ to 40℃|
|Relative humidity||<95% non-condensing|
M100 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
|7(+)and20(-)||Modulated input signal||This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
|3||Short circuit between pin3 and pin16||RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1)48V 50A power supply,need to GND
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4) The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Beijing Dawei Laser Technology Co., Ltd.
Contact Person: tinazhang