|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Payment Terms:||T/T, L/C, Western Union, MoneyGram, D/P|
|Supply Ability:||500 units per month|
|Wavelength:||10.6um / 9.3um/ 10.2um Optional||Output Power:||30W|
|Weight:||6.6kg||Mode Of Quality:||M2﹤1.2|
|Working Frequency &duty Cycle:||0～25KHZ，0～100%DC||Degree Of Polarization:||Linear Polarization（﹥100:1）parallel To Width Direction|
Co2 Laser Tube , Ceramic Laser Tube , Model D30 , Very Compact , Long Lifetime , 18 Month Guarantee period
Beijing Dawei Laser Technology Co., Ltd. is a professional CO2 laser tube manufacturer for more than 10 years . We provide co2 laser source to the industrial and medical sectors in many different applications .
Beijing Dawei Laser .
The company has an excellent R& D team to strive for excellence of high technology in laser area, we dedicate to produce and provide high quality products for the domestic and international customers with the best technical support and after-sales maintenance services.
We have CE certificate and three patent certificates, CNAS, embedded control software registration certificate,etc.
Our products are metal sealed,the beam cavity is made of ceramic, we use beam folding technology so the tube size is small and space saving . The laser tubes can be repaired and refilled , most of them are air cooling.
Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service
We provide have longer warranty period of time (18 month warranty period ).
Model D30 : 10.6um wavelength
Model D30I: 9.3um wavelength
The product is very compact and space saving .
Model D30 Laser Specification and working condition
|Continuous rated output Power||30w|
|Power stability rate||±5%|
|Mode of quality||M2﹤1.2|
|Beam divergence angle||7.5±0.5m full angle|
|Degree of polarization||Linear polarization(﹥100:1)parallel to width direction|
|Working frequency &duty cycle||0～25KHZ,0～100%DC|
|Dimension L x W x H||
|Input voltage||48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.|
|Max Heat Load||﹤575w|
|Maximum hull temperature||﹤60℃(140℉)|
|Working environment temperature||5℃～40℃(41℉～104℉)|
1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
2.Definition of stabilization: ±(Pmax－Pmin)/(2Pmax)
3.Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.
D30 Signal Interface Description and Connector Pinout
|PIN NO||SIGNAL DESCRIPTION|
( PWM+ orange white)
TTL logic input ；1=RF ON,0=RF OFF；1KΩ impedance;
This input turns on the laser. See Pin7,Control Enable
|2(+15V orange)||+15VDC±0.5VDC,Max output for customer using is 0.25A|
(Laser green white)
Laser status output
TTL logic output,1=LASER OK,0=LASER Fault;
When fault is not detected ,output valid.
Temperature status output
TTL logical output,1=normal temperature,0= Ultra high temperature;
When the case temperature is below 60℃, the output is valid
(Volt blue white )
Power and voltage status output
TTL logical output;1=normal voltage;
0= abnormal voltage
|6(GND Green)||For internal use. must ground connected|
(Enable brown white)
TTL Logical input；1= Laser control enable,0=Laser controlled shutdown
This input must be valid before RF is enabled to turn on the laser.
1.The connector uses the RJ-45 type.
2.The color noted on pin can correspond to color of the cable color our company sent together with the product.
Contact Person: tracy