Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

          Focus On RF CO2 Laser Research And Development

Home Products30W Laser Tube

20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time

20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time

    • 20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time
    • 20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time
    • 20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time
    • 20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time
  • 20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time

    Product Details:

    Place of Origin: China-Beijing
    Brand Name: DAVI
    Certification: CE,ROHS,FDA
    Model Number: D20

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 unit
    Price: Negotiation
    Packaging Details: 61*29*25CM (LxWxH) Carton
    Delivery Time: In 5 working days after got payment
    Payment Terms: L/C, T/T, Western Union
    Supply Ability: 500 units/per month
    Contact Now
    Detailed Product Description
    Model: D20 Working Frequency: 0-100%
    Power Stability Rate: +-5% Max Heat Load: <342w
    Dimension: 357*92.5*142mm Output Power: 20w

    Longer warranty time sealed ceramic core Medical CO2 laser tube air cooled

     

    Medical treatment

     

    -CO2 Fractional Laser Scare Removal Skin Resurfacing Device
    -CO2 laser therapy
    -RF Stretch Marks Removal CO2 Fractional Laser Machine
    -RF Tube Laser Generator Vaginal Tightening Laser
    -Cosmetology surgery apparatus

     

    Laser Sources differ from traditional illumination sources because they produce coherent light. The illumination spectrum is often narrow band with line widths as narrow as tens of megahertz and divergence as low as fractions of milliradians. Lasers are either utilized in free space, steered with traditional optics, or the source is coupled into a fiber. In a fiber coupled orientation, the emitting fiber tip is mounted at the location of beam delivery, reducing the need for steering optics. When a laser is fiber coupled, a cone of light is produced instead of a collimated beam.

     

     

    20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time

     

    D20 Specifications and using condition

     

     

    Characteristics Specified value
    Wavelength  10.6µm
    Output Power ≥20W
    Power Stability <±5%
    Mode >98% TEM₀₀
    Beam Size 1.8±0.2mm
    Beam Divergence 7.5±0.5 mrad
    Beam Quality M²<1.2
    Polarization >100 to 1 fixed linear
    Modulation TTL up to 25kHz
    Weight 6.6kg
    Input voltage 36 VDC <±2% regulation <1%P-P Noise/Ripple
    Input DC current ≤9A
    Ambient Air Temperature 5℃ to 40℃
    Altitude <6,500 ft.(2,000m)
    Humidity Non-condensing

    Those characteristics are guaranteed ;all other stated characteristics are typical.

    Specifications are subject to change without notice.

     

     

    20 Watt Sealed Co2 Laser Tube Max Heat Load Below 342W Long Warranty Time

     

    D20 Signal Interface and Pin Description

     

    PIN NO SIGNAL DESCRIPTION
    1(PWM Orange and white)

    RF Enable

    TTL logic input

    1=RF ON,0=RF OFF;1KΩ impedance.

    This input turns on the laser.(See also Pin 7,Control Enable, below)

    2(+15V Orange) +15 VDC±0.5VDC,0.25 A Max output for customer use
    3(Laser Green and white)

    Laser ok

    TTL logic output,1=LASER OK,0=LASER Fault;

    Output is asserted when no faults(SWR, Temp or Volt.)are detected

    4(Temp Blue)

    Temperature OK

    TTL logical output,1=Temp ok,0=Temp fault;

    Output is asserted when temperature is below 60℃

    5(Volt Blue and white)

    Power and voltage OK

    TTL logical output;1= voltage ok,0=voltage fault;

    Output is asserted when DC supply voltage is below max. value

    6(GND Green) For internal use. must be grounded
    7(Enable Brown and white)

    Control enable

    TTL Logical input;1= Laser control enable,0= Laser controlled disabled

    This input must be asserted before RF enable can be used to turn on the laser.

    8(GND Brown)

     

    GND

    Attention:

    1) The connector uses the RJ-45 type

    2) These specifications are subject to change

     

     

    Competitive Advantages of DAVI company:

    1. Favourable price and longer warranty period time

    2. Sales accounted for 60% of the Chinese market

    3. Excellent R&D team provides the most high-quality technical support and after-sales maintenance services,operation video etc.

    4. Repair and refill the tube

    5. Repair rate of 30w laser is only 5% in 2017

    6. CE and three Patent certificates ,CNAS, Embedded control software registration certificate etc

     

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: sarah

    Tel: +8617716524131

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.