|Place of Origin:||China-Beijing|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||600x280x230mm(LxWxH) Carton|
|Delivery Time:||Delivery in 5days after got payment|
|Payment Terms:||D/P, Western Union, L/C, T/T|
|Supply Ability:||500units/per month|
|Color:||Sliver||Cooling Mode:||Air Cooling|
|Mode Quality:||<1.2||Heat Load:||<475w|
Most stable machine of DAVI is 30W Laser Tube favorable price longer lifetime
Technology about Co2 lasers in DAVI:
Since the introduction of the first sealed all metal tube RF excited CO2 laser in 1984,DAVI has delivered so many industrial lasers worldwide. Today DAVI lasers are used in an extremely wide variety of industrial and medical applications, including marking, coding, engraving, cutting, and converting on a never-ending list of target materials. Precision, reliability, ruggedness, and near maintenance-free operation are the hallmark of our lasers. Customers choose us because we deliver long-lasting solutions to their process challenges quickly.
A successful CO2 laser drilling and perforating application requires a balance of high peak power and good rise/fall times to ensure fast throughput. When drilling and perforating, coupling the energy into the material efficiently yields clean, accurate holes through the material. The energy balance is especially critical for materials like ceramics. The laser operates in a pulsed mode to remove material steadily, until penetration occurs and a hole forms. Pulses with discreet durations and energy levels create very small, repeatable hole diameters. We offer pulse lasers with the industry's best peak pulse power and exceptional rise and fall times, for precise pulsed laser beams.
D30 Specifications and using condition
|Beam Divergence||7.5±0.5 mrad|
|Polarization||>100 to 1 fixed linear|
|Modulation||TTL up to 25kHz|
|Input voltage||48VDC <±2% regulation <1%P-P Noise/Ripple|
|Input DC current||≤12A|
|Ambient Air Temperature||5℃ to 40℃|
Those characteristics are guaranteed ;all other stated characteristics are typical.
Specifications are subject to change without notice.
D30 Signal Interface and Pin Description
|PIN NO||SIGNAL DESCRIPTION|
|1(PWM Orange and white)||
TTL logic input
1=RF ON,0=RF OFF；1KΩ impedance.
This input turns on the laser.(See also Pin 7,Control Enable, below)
|2(+15V Orange)||+15 VDC±0.5VDC,0.25 A Max output for customer use|
|3(Laser Green and white)||
TTL logic output,1=LASER OK,0=LASER Fault;
Output is asserted when no faults(SWR, Temp or Volt.)are detected
TTL logical output,1=Temp ok,0=Temp fault;
Output is asserted when temperature is below 60℃
|5(Volt Blue and white)||
Power and voltage OK
TTL logical output;1= voltage ok,0=voltage fault;
Output is asserted when DC supply voltage is below max. value
|6(GND Green)||For internal use. must be grounded|
|7(Enable Brown and white)||
TTL Logical input；1= Laser control enable,0= Laser controlled disabled
This input must be asserted before RF enable can be used to turn on the laser.
1) The connector uses the RJ-45 type
2) These specifications are subject to change
Contact me if you have any requirments.Thanks.
Contact Person: sarah