|Place of Origin:||Beijing, China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||61x29x25cm(LxWxH) Carton Package|
|Delivery Time:||Delivery in 5days after got payment|
|Payment Terms:||D/P, Western Union, L/C, T/T|
|Supply Ability:||500units/per month|
|Duty Cycle:||0-100%||Storage Environment:||5-40degree|
High stability Long lifetime CW or Pulsed mode RF CO2 Laser Tube made in China
Knowlague about laser source company:
Laser Sources differ from traditional illumination sources because they produce coherent light. The illumination spectrum is often narrow band with line widths as narrow as tens of megahertz and divergence as low as fractions of milliradians. Lasers are either utilized in free space, steered with traditional optics, or the source is coupled into a fiber. In a fiber coupled orientation, the emitting fiber tip is mounted at the location of beam delivery, reducing the need for steering optics. When a laser is fiber coupled, a cone of light is produced instead of a collimated beam.
D30 Specifications and using condition
|Beam Divergence||7.5±0.5 mrad|
|Polarization||>100 to 1 fixed linear|
|Modulation||TTL up to 25kHz|
|Input voltage||48 VDC <±2% regulation <1%P-P Noise/Ripple|
|Input DC current||≤12A|
|Ambient Air Temperature||5℃ to 40℃|
Those characteristics are guaranteed ;all other stated characteristics are typical.
Specifications are subject to change without notice.
D30 Signal Interface and Pin Description
|PIN NO||SIGNAL DESCRIPTION|
1(PWM Orange and white)
TTL logic input
1=RF ON,0=RF OFF；1KΩ impedance.
This input turns on the laser.(See also Pin 7,Control Enable, below)
|+15 VDC±0.5VDC,0.25 A Max output for customer use|
3(Laser Green and white)
TTL logic output,1=LASER OK,0=LASER Fault;
Output is asserted when no faults(SWR, Temp or Volt.)are detected
TTL logical output,1=Temp ok,0=Temp fault;
Output is asserted when temperature is below 60℃
5(Volt Blue and white)
Power and voltage OK
TTL logical output;1= voltage ok,0=voltage fault;
Output is asserted when DC supply voltage is below max. value
|6(GND Green)||For internal use. must be grounded|
7(Enable Brown and white)
TTL Logical input；1= Laser control enable,0= Laser controlled disabled
This input must be asserted before RF enable can be used to turn on the laser.
1. The connector uses the RJ-45 type
2. These specifications are subject to change
Competitive Advantages of DAVI company:
1. Favourable price and longer warranty period time
2. Sales accounted for 50% of the Chinese market
3. Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4. Repair and refill the tube
5. CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.
Mobile phone :+86 15611820978(Whatsapp)
Beijing Dawei Laser Technology Co., Ltd.
Contact Person: wendy