|Place of Origin:||Beijing, China|
|Minimum Order Quantity:||1 Unit|
|Packaging Details:||118*39*36cm (LxWxH) Carton Package|
|Payment Terms:||L/C, T/T, D/A, Western Union|
|Supply Ability:||500units/per month|
|Dimension:||118*39*36cm (LxWxH)||Cooling Way:||Water Cooling|
|Color:||Black||Max Heat Load:||<342W|
|Beam Diameter:||<1.5||Working Frequency:||0-70%|
Middle power 100W Co2 Laser Tube mostly for engraving and cutting machine
Laser Sources differ from traditional illumination sources because they produce coherent light. The illumination spectrum is often narrow band with line widths as narrow as tens of megahertz and divergence as low as fractions of milliradians. Lasers are either utilized in free space, steered with traditional optics, or the source is coupled into a fiber. In a fiber coupled orientation, the emitting fiber tip is mounted at the location of beam delivery, reducing the need for steering optics. When a laser is fiber coupled, a cone of light is produced instead of a collimated beam.
For CO2 Laser Cutting Machine
M100 Laser specifications and using conditions
|Average power range||10-100w|
|Pulse energy range||5-200mj|
|Pulse rise and fall time||<90us|
|Stability of beam pointing||<200 urad|
|Divergence||<11.0mrad Full angle|
|Duty cycle range||0-60%|
|DC input Voltage||48V±1%|
|DC inout Current||50A,peak value:100A|
|Cooling way||water cooling|
|Environment temperature||5℃ to 40℃|
|Relative humidity||<95% non-condensing|
M100 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
Modulated input signal
|This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and pin16
|RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1. 48V 50A power supply,need to GND
2. Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3. Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4. The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Competitive Advantages of our lasers:
1. 3-5 years Long lifetime, Stable machine and mode quality
2. All metal body ceramic core and very firm
3. Small size easy to carry save space
4. Quick response time nanosecond count
5. RF discharge, the top of machine covered with circuit
Contact me if you have any questions,thanks.
Contact Person: ella