|Place of Origin:||China|
|Minimum Order Quantity:||1 Unit|
|Packaging Details:||762mm*145mm*164mm (LxWxH) wooden package|
|Payment Terms:||T/T, D/P, L/C, D/A|
|Supply Ability:||300 Units per Month|
|Output Power:||150w||Maximum Hull Temperature:||<60 Degree|
|Working Alititude:||<2000m||Beam Quality:||<1.5|
|Duty Cycle:||0-60%||Cooling Way:||Water Cooling|
150 watt co2 laser tube,
rf laser tube
Hot sale high power laser source using in cutting wood or plastic 150W Co2 Laser Tube
Application: DAVI CO2 Laser Tube can be successfully applied in medical,cosmetic,electronic components,machinery parts,laser engraving,laser marking,packaging,printing and other industries. See application video by making use of DAVI CO2 Laser tube on these material: cloth,wood,paper and PE,etc.
Industrial-grade reliability and support
In demanding manufacturing applications, uptime and lowest cost of operation are paramount. That’s why every aspect of the design, manufacturing, and field servicing of our lasers is specifically targeted to maximize product uptime and increase throughput. Our worldwide service and technical support infrastructure will ensure optimum laser performance and highest reliability in your production line.
M150 specification and working condition
|Specification parameter||Average output power||150W|
|Average power range||10-150W|
|Typical Properties||Peak power||375W|
|Pulse energy range||5-300mJ|
|Pulse rise and fall time||﹤90|
|Power stability rate||﹤±10%|
|The stability of the beam pointing||﹤200μrad|
|Beam cycle degree||﹤1.2:1|
|Beam divergence angle||﹤9mrad|
|Duty cycle adjustable range||0-60%|
|Degree of polarization||﹥100:1/Linear polarization|
|Power parameter||DC input voltage||48v±1%|
|DC input current||Max mean square root:50A,peak value:100A|
|Cooling water parameter||Cooling water speed||5.7L/min|
|Cooling water temperature range||10℃—35℃|
|Water Rigidity(CaCO3)||﹤250 mg/L|
|Environment parameter||Environment temperature||5℃—40℃|
|Relative Humidity<95% non condensation||﹤95% non condensation|
(1)Power test condition: Power pulse width 600μs,duty cycle 60%,25℃ cooling water. As temperature rise,the output power will decline.
(2)Power stability is defined as plus or minus ±(Pmax - Pmin)/2Pmax .
|M150 Signal Interface Description and Connector Pinout|
|DB25connector||Connect instruction||Signal instruction|
|7(+) and 20(-)||
modulation input signal
|This teminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should be between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
Short circuit between pin3 and 16
|Enable radio frequency amplifier.Digital signal is effect when it is low, low level voltage input will enable the RF amplifier work.|
1. 48V 50A power supply, the power must have GND.
2. Pay attention to the dust proof of the laser output window,prevent the lens burn caused by dust pollution, especially when the output window is upward.
3. Prevent the back reflection of laser,any back reflection will cause the damage of laser.
4. We suggest to fix either front end or back end of the laser tube, but don’t fix them both when you assemble, the purpose is to prevent the laser cavity shape distortion being caused by heat-expansion and cold-contraction during use.
5. This laser module is water cooling , please run the water cooling machine before the laser starts to work.
When you have other questions in the using process, please contact with us for solution on time .
Competitive Advantages of machine:
1, 3-5 years Long lifetime, Stable machine and mode quality
2, All metal body and very firm
3, Small size easy to carry
4, Quick response time nanosecond count
5, RF discharge, the top of machine covered with circuit
Contact us if you have any requirments .
Thank you very much.
Contact Person: Tracy Xu