Tel:
China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.

          Focus On RF CO2 Laser Research And Development

Home ProductsSealed CO2 Laser Tube

Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz

Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz

    • Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz
    • Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz
  • Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz

    Product Details:

    Place of Origin: China
    Brand Name: DAVI
    Certification: CE,ISO9001
    Model Number: D30I

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Unit
    Price: Negotiation
    Packaging Details: 60cm*28cm*23cm
    Contact Now
    Detailed Product Description
    Mode Of Quality: M2﹤1.2 Beam Diameter: 1.8±0.2mm
    Beam Divergence Angle: 7.5±0.5m Full Angle Working Frequency &duty Cycle: 0~25KHZ,0~100%DC
    Max Heat Load: ﹤575w

    Sealed CO2 Laser Tube 9.3um wavelength for marking on PE , drinking Bottle Model D30I Long product Lifetime good price

     

     

    Our laser machines offer extensive possibilities when it comes to the laser cutting and engraving of various materials, ranging from plexiglass to MDF, and from metal to glass.

    Do you utilise a specific type of material and you want to know whether or not it can also be processed by our laser machines? If so, please send us a sample of the material and we will gladly test its processability for you, free of charge. If necessary, we can adjust the settings of our laser machines so that you too can work with them.

     

    9.3um Wavelength laser tube is perfect laser source for maring on PE, some medical device companies also need it to use in dentistry . 

    Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz

     

      Model D30 Laser Specification and working condition

     

    System Performance

    Index

    Model D30/D30i
    Wavelength 10.6/9.3/10.2μm
    Continuous rated output Power 30w
    Power stability rate ±5%
    Mode of quality M2﹤1.2
    Beam Diameter 1.8±0.2mm
    Beam divergence angle 7.5±0.5m full angle
    Degree of polarization Linear polarization(﹥100:1)parallel to width direction
    Working frequency &duty cycle 0~25KHZ,0~100%DC
    Specification weight 6.6kg(14.5lbs)
    Dimension L x W x H

    357×92.5×142mm

    (14.1×3.64×5.59in.)

    Input voltage 48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.
    Max Heat Load ﹤575w
    Maximum hull temperature ﹤60℃(140℉)
    Working environment temperature 5℃~40℃(41℉~104℉)
    Working height ﹤2000m(6,500ft.)
    Humidity Non-condensation
    Storage environment -10℃~60℃(14℉~140℉),Non-condensation

    1. Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.

    2. Definition of stabilization: ±(Pmax-Pmin)/(2Pmax)

    3. Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.

     

     

    D30 Signal Interface Description and Connector Pinout

    PIN NO SIGNAL DESCRIPTION

    1

    ( PWM+ orange white)

    RF Enable

    TTL logic input ;1=RF ON,0=RF OFF;1KΩ impedance;

    This input turns on the laser. See Pin7,Control Enable

    2(+15V orange) +15VDC±0.5VDC,Max output for customer using is 0.25A

    3

    (Laser green white)

    Laser status output

    TTL logic output,1=LASER OK,0=LASER Fault;

    When fault is not detected ,output valid.

    .

    4

    (Temp Blue)

    Temperature status output

    TTL logical output,1=normal temperature,0= Ultra high temperature;

    When the case temperature is below 60℃, the output is valid

    5

    (Volt blue white )

    Power and voltage status output

    TTL logical output;1=normal voltage;

    0= abnormal voltage

    6(GND Green) For internal use. must ground connected

    7

    (Enable brown white)

    Control enable

    TTL Logical input;1= Laser control enable,0=Laser controlled shutdown

    This input must be valid before RF is enabled to turn on the laser.

     

    8(GND Brown) GND

    Attention:

    1.The connector uses the RJ-45 type.

    2.The color noted on pin can correspond to color of the cable color our company sent together with the product.

    D30 dimension drawing

    Advanced Co2 Laser Metal Tube , Rf Co2 Laser Tube Working Frequency 0 - 25KHz

     

    Contact Details
    Beijing Dawei Laser Technology Co., Ltd.

    Contact Person: amy

    Tel: +8617864735559

    Send your inquiry directly to us (0 / 3000)

    Beijing Dawei Laser Technology Co., Ltd.
    No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
    Tel:86-10-89788986
    Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. Copyright © 2018 - 2019 davilaser.com. All Rights Reserved.