|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||762mm*145mm*164mm (LxWxH) wooden package|
|Delivery Time:||5-8 working days got payment|
|Payment Terms:||T/T, L/C, D/A, Western Union, MoneyGram|
|Supply Ability:||100units per month|
|Power Stability Rate:||<±10%||Maximum Hull Temperature:||<60 Degree|
|Max Heat Load:||2400w||Cooling Water Temperature Range:||10-35 Degree|
|Humidity:||<95% No-condensing||Pulse Rise And Fall Time:||90us|
High Power Laser Tube output over 100w stable machine manufacture in Beijing low price
About Davi and laser industry:
The DAVI Laser team listens, informs, communicates and shares its experience with all its customers in China and worldwide.
Although it has installed thousands of systems, the challenge continues and the best is yet to come!
Continuous investments in research and innovation are the fundamental drivers of our growth, allowing us to develop new technologies and perfect those currently existing for laser cutting machines. We serve our customers and industrial partners with our heads, but also and above all with our hearts.
Model M100 Laser Specification and working condition
|Specification parameter||Average output power||100W|
|Output power range||10-100W|
|Typical Properties||Peak power||250W|
|Pulse energy range||5-200mJ|
|Pulse rise and fall time||﹤90|
|Power stability rate||﹤±10%|
|The stability of the beam pointing||﹤200μrad|
|Beam cycle degree||﹤1.2:1|
|Beam divergence Angle||﹤9.0mrad|
|Duty cycle adjustable range||0-60%|
|Degree of polarization||﹥100:1 Linear polarization|
|Power parameter||DC input voltage||48v±1%|
|DC input current||Max mean square root:50A,peak value:100A|
|Cooling water parameter||Cooling water speed||5.7L/min|
|Cooling water temperature range||10℃—35℃|
|Water Rigidity(CaCO3)||﹤250 mg/L|
|Environment parameter||Environment temperature||5℃—40℃|
|Relative Humidity<95% Non-condensation||﹤95% Non condensation|
Attention : (1)Power test condition: Power pulse width 600μs,duty cycle 60%,25℃ cooling water. As temperature rise,the output power will decline.
Power stability is defined as plus or minus ±(Pmax - Pmin)/2Pmax .
M100 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
|7(+)and20(-)||Modulated input signal||This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
|3||Short circuit between pin3 and pin16||RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1)48V 50A power supply,need to GND
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4) The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Competitive Advantages of company:
1, Favourable price and longer warranty period time
2, Sales accounted for 50% of the Chinese market
3, Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4, Repair and refill the tube
5, CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.
Looking forward to your messages about our laser source,thanks.
Contact Person: amy