China RF CO2 Laser Tube manufacturer
Beijing Dawei Laser Technology Co., Ltd.


Home ProductsRF CO2 Laser Tube

10.2um Co2 Laser Tube Replacement Silvery Color For Laminating Material

10.2um Co2 Laser Tube Replacement Silvery Color For Laminating Material

10.2um Co2 Laser Tube Replacement Silvery Color For Laminating Material

Product Details:

Place of Origin: China-Beijing
Brand Name: DAVI
Certification: CE ROHS
Model Number: D30i

Payment & Shipping Terms:

Minimum Order Quantity: 1 unit
Price: Negotiation
Packaging Details: 600x280x230mm(LxWxH) Carton
Delivery Time: Delivery in 5days after got payment
Payment Terms: D/P, Western Union, L/C, T/T
Supply Ability: 500units/per month
Contact Now
Detailed Product Description
Rated Power: 30W Wavelength: 10.2um
Gross Weight: 7.5kg Package Dimension: 68*23*28mm
Working Altitude: <2000m Color: Silvery

10.2um applied in laminating material RF CO2 Laser Tube TEM00 mode beam quality 30w


Co2 laser markers are widely used in the field of non-metal field, such as: garment & shoes engraving, fabric cutting, medical packaging, handicrafts & gift, food printing, soft drink printing, cigarette code, beverage packaging tobacco printing, rubber marking machine, acrylic marker, water bottle marker, marking on plastic, leather engraving industries.


10.2um Co2 Laser Tube Replacement Silvery Color For Laminating Material


D30 Specifications and using condition


Characteristics Specified value
Wavelength 10.2um
Output Power ≥30W
Power Stability <±5%
Mode >98% TEM₀₀
Beam Size 1.8±0.2mm
Beam Divergence 7.5±0.5 mrad
Beam Quality M²<1.2
Polarization >100 to 1 fixed linear
Modulation TTL up to 25kHz
Weight 6.6kg
Input voltage 48 VDC <±2% regulation <1%P-P Noise/Ripple
Input DC current ≤12A
Ambient Air Temperature 5℃ to 40℃
Altitude <6,500 ft.(2,000m)
Humidity Non-condensing

Those characteristics are guaranteed ;all other stated characteristics are typical.

Specifications are subject to change without notice.


10.2um Co2 Laser Tube Replacement Silvery Color For Laminating Material



D30i 10.2um Signal Interface and Pin Description


1(PWM Orange and white)

RF Enable

TTL logic input

1=RF ON,0=RF OFF;1KΩ impedance.

This input turns on the laser.(See also Pin 7,Control Enable, below)

2(+15V Orange) +15 VDC±0.5VDC,0.25 A Max output for customer use
3(Laser Green and white)

Laser ok

TTL logic output,1=LASER OK,0=LASER Fault;

Output is asserted when no faults(SWR, Temp or Volt.)are detected

4(Temp Blue)

Temperature OK

TTL logical output,1=Temp ok,0=Temp fault;

Output is asserted when temperature is below 60℃

5(Volt Blue and white)

Power and voltage OK

TTL logical output;1= voltage ok,0=voltage fault;

Output is asserted when DC supply voltage is below max. value

6(GND Green) For internal use. must be grounded
7(Enable Brown and white)

Control enable

TTL Logical input;1= Laser control enable,0= Laser controlled disabled

This input must be asserted before RF enable can be used to turn on the laser.

8(GND Brown)




1) The connector uses the RJ-45 type

2) These specifications are subject to change




Question : The laser may fail to start properly after being laid aside for a period of time. Why does this problem arise, how to solve it when it happens?

Answer: If the laser tube was laid aside for a long time, when use it again,the laser module may not be able to start preionization properly.Under this situation,the electronic circuit of the laser module may test a high degree back reflection voltage, which will cause SWR fault (Laser OK Fault) so the laser can’t start work normally. When you start to use the laser tube after putting aside for a long time , it is advised to set the duty cycle of Modulation Signal less than 10% frequency less than 25KHz,this operation can avoid trigger SWR Fault. When a SWR fault already ocurred,you can add the Modulation Signal to the laser tube, the electronic circuit will send a Secondary ionization pulse which can help the laser tube heating up.


Contact Details
Beijing Dawei Laser Technology Co., Ltd.

Contact Person: tracy

Send your inquiry directly to us (0 / 3000)

Beijing Dawei Laser Technology Co., Ltd.
No. 1 Zhenchao Road, Technology Park, Changping District, Beijing, China
Mobile Site Privacy Policy China Good Quality RF CO2 Laser Tube Supplier. © 2018 - 2020 All Rights Reserved.