|Place of Origin:||Beijing, China|
|Minimum Order Quantity:||1 Unit|
|Packaging Details:||61x29x25cm(LxWxH) Carton Package|
|Payment Terms:||T/T, D/P, L/C|
|Supply Ability:||500 Units Per month|
|Wavelength:||10.6um||Continuous Rated Output Power:||30w|
|Degree Of Polarization:||Linear Polarization（﹥100:1）parallel To Width Direction||Weight:||6.6kg（14.5lbs）|
|Dimension:||357×92.5×142mm （14.1×3.64×5.59in.）||Maximum Hull Temperature:||﹤60℃（140℉）|
co2 laser metal tube,
carbon dioxide laser tube
D30 : CO2 Laser Tubes for Medical Devices Fractional Beauty Machines Continuous mode super pulse mode
Davi Co2 laser tube D30/D30I is perfect laser source for medical devices in General Surgery, Dermatology, Plastic Surgery, Urology, Dentistry and OB & GYN medicine.
1. Beijing Dawei Laser Technology is a Professional manufacturer of CO2 laser tubes for more than 10 year.
2. Our products have Favourable price and longer warranty period of time (18 month warranty period ).
3. Covered 60% of market share in China .
4. Excellent R&D team provides high quality technical support and efficient after sales maintenance services.
5. CE certificate and three patent certificates, CNAS, embedded control software registration certificate,etc.
6. DAVI laser is RF CO2 laser tube supplier to many reputed laser companies for long term .
7. Repair and refill the tube .
8. The team of sales and adviser are actively assisted by an R&D team of specialists in electronics, software,mechanics and optics, so the clients' requirements and requests can be speedily and efficiently implemented.
Model D30 product picture
Model D30 Laser Specification and working condition
|Continuous rated output Power||30w|
|Power stability rate||±5%|
|Mode of quality||M2﹤1.2|
|Beam divergence angle||7.5±0.5m full angle|
|Degree of polarization||Linear polarization(﹥100:1)parallel to width direction|
|Working frequency &duty cycle||0～25KHZ,0～100%DC|
|Dimension L x W x H|
|Input voltage||48VDC±2% range,Average current max 12A,required power supply could bear peak current 18A no less than 1mS.|
|Max Heat Load||﹤575w|
|Maximum hull temperature||﹤60℃(140℉)|
|Working environment temperature||5℃～40℃(41℉～104℉)|
1.Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
D30 Signal Interface Description and Connector Pinout
|PIN NO||SIGNAL DESCRIPTION|
1( PWM+ orange white)
TTL logic input ；1=RF ON,0=RF OFF；1KΩ impedance;
This input turns on the laser. See Pin7,Control Enable
|+15VDC±0.5VDC,Max output for customer using is 0.25A|
3(Laser green white)
Laser status output
TTL logic output,1=LASER OK,0=LASER Fault;
When fault is not detected ,output valid.
Temperature status output
TTL logical output,1=normal temperature,0= Ultra high temperature;
When the case temperature is below 60℃, the output is valid
5(Volt blue white )
Power and voltage status output
TTL logical output;1=normal voltage;
0= abnormal voltage
|6(GND Green)||For internal use. must ground connected|
7(Enable brown white)
TTL Logical input；1= Laser control enable,0=Laser controlled shutdown
This input must be valid before RF is enabled to turn on the laser.
D30 dimension drawing
Contact Person: Tracy Xu