|Place of Origin:||Beijing, China|
|Certification:||CE, ISO 9001, FDA, ROHS|
|Model Number:||D20(10.6um), D20i (9.3um)/ (10.2um)|
|Minimum Order Quantity:||1 Unit|
|Supply Ability:||500 units per month|
|Continuous Rated Output Power:||20W||Wavelength:||10.6/9.3/10.2μm|
|Power Stability Rate:||±5%||Mode Of Quality:||M2﹤1.2|
|Beam Divergence Angle:||7.5±0.5m Full Angle||Working Frequency &duty Cycle:||0～25KHZ，0～100%DC|
RF CO2 Output Power 20W Metal Laser Tube Long Warranty Period
Our lasers team:
Our new laser systems are the result of team work that shares skills, capabilities and talent.There is also a Training Room where training and updating courses are periodically organised.CO2 Laser Tube can be successfully applied in medical,cosmetic,electronic components,machinery parts,laser engraving,laser marking,packaging,printing and other industries. See application video by making use of DAVI CO2 Laser tube on these material: cloth,wood,paper and PE,etc.
Advantages of DAVI leading supplier:
1, Favourable price and longer warranty period time
2, Sales accounted for more than 60% of the Chinese market
3, Excellent R&D team provides the most high-quality technical support and after-sales maintenance services
4, Repair and refill the tube
5, CE certificate and three Patent certificates ,CNAS, Embedded control software registration certificate etc.
Model D20 Laser Specification and working condition
|Continuous rated output Power||20w|
|Power stability rate||±5%|
|Mode of quality||M2﹤1.2|
|Beam divergence angle||7.5±0.5m full angle|
|Degree of polarization||Linear polarization(﹥100:1) parallel to width direction|
|Working frequency &duty cycle||0～25KHZ,0～100%DC|
|Dimension L x W x H||
|Input voltage||36VDC±2%,max average current is 9A,peak current that power supply could hold up is 14A,it can’t be more than 1mS.|
|Max Heat Load||﹤430w|
|Maximum hull temperature||﹤60℃(140℉)|
|Working environment temperature||5℃～40℃(41℉～104℉)|
|Storage environment||－10℃～60℃(14℉～140℉),No condensation|
1. Laser power is tested according to the temperature of laser which is 25℃,everytime the laser temperature rises 1℃,the output power will reduce 1%.
2. Definition of stabilization: ±(Pmax－Pmin)/(2Pmax)
3. Testing condition of stabilization: Warming up about 10mins,controlling duty cycle constantly,under the normal operating environment.
D20 Signal Interface Description and Connector Pinout
|PIN NO||SIGNAL DESCRIPTION|
( PWM+ orange white)
TTL logic input ；1=RF ON,0=RF OFF；1KΩ impedance;
This input turns on the laser. See Pin7,Control Enable
|2(+15V orange)||+15VDC±0.5VDC,Max output for customer using is 0.25A|
(Laser green white)
Laser status output
TTL logic output,1=LASER OK,0=LASER Fault;
When fault is not detected ,output valid
Temperature status output
TTL logical output,1=normal temperature,0= Ultra high temperature;
When the case temperature is below 60℃, the output is valid.
(Volt blue white )
Power and voltage status output
TTL logical output;1=normal voltage;
0= abnormal voltage;
|6(GND Green)||For internal use. must ground connected|
(Enable brown white)
TTL Logical input；1= Laser control enable,0=Laser controlled shutdown
This input must be valid before RF is enabled to turn on the laser.
1.The connector uses the RJ-45 type.
2.The color noted on pin can correspond to the cable color our company sent together with the product.
Contact Person: amy