|Place of Origin:||Beijing, China|
|Certification:||CE, ROHS, FDA|
|Minimum Order Quantity:||I Unit|
|Delivery Time:||5 days after payment received|
|Supply Ability:||500 units per month|
|Wavelength:||10.6um||Beam Divergence Angle:||<11mrad|
|Cooling Way:||Water Cooled|
Water Cooling RF Output Power 150W CO2 Laser Tube For Laser Marking Machine
Leading supplier of Metal RF co2 laser tubes in China
DAVI Lasers is a reliable company for expert advice and good service in the field of co2 laser beam source. Superior beam quality,favourable price, long product lifetime ,efficient technical support are the main strengths of our products and service.
Day after day, inside the Demo Room, our specialised staff performs tests: a fundamental job that contributes to the continuous development of DAVI Laser products
Application on materials like wood,paper,acrylics,leather,PET,glass,carton and so on
Our laser machines are suitable for the engraving and cutting of many types of materials, ranging from non-metal to plastics, and from leather to glass.
M100 Laser specifications and using conditions
|Average power range||10-150w|
|Pulse energy range||5-300mj|
|Pulse rise and fall time||<90us|
|Stability of beam pointing||<200 urad|
|Divergence||<11.0mrad Full angle|
|Duty cycle range||0-60%|
|DC input Voltage||48V±1%|
|DC inout Current||50A,peak value:100A|
|Cooling way||water cooling|
|Environment temperature||5℃ to 40℃|
|Relative humidity||<95% non-condensing|
M150 Pin description(water cooled)
|DB25 connector||Wring instruction||Signal description|
|7(+)and20(-)||Modulated input signal||This terminal requires input differential signal to control the output laser,when the signal is effective (high level)there is laser output; when the signal is invalid (zero level), there is no laser output. The pulse width of the signal should between 10 and 998 ms,duty cycle less than 60% and the pulse frequency 0-100khz.|
|3||Short circuit between pin3 and pin16||RF amplifier enable,digital signal low efficiency, input low level allows the RF amplifier to work.|
1)48V 50A power supply,need to GND
2) Note the dust protection of the laser output window. Prevent the lens from burning due to dust particles. Especially the way laser output window faces up.
3) Be careful to prevent backward reflection,any backward reflection can cause laser damage.
We suggest the front and rear end of the laser should not be completely fixed at the same time,avoid the deformation of the cavity due to the stress caused by the thermal expansion of the material.
4) The laser is water cooled, water cooler machine must be opened before the start of the laser.
If there are any problems during the usage of the laser, please contact us for your timely solution.Thank you.
Contact Person: amy